Product Introduction
The Dialysis Dressing Kit is a medical kit that contains all the necessary items to protect the cannula or needle insertion site during dialysis treatment. The main function of this kit is to ensure the cleanliness and safety of the insertion site during and after dialysis, prevent infection and maintain a sterile environment. This kit is usually used by patients undergoing hemodialysis or peritoneal dialysis. After each dialysis treatment, the medical staff will use the dialysis dressing kit to change the dressing to ensure the hygiene of the insertion site and prevent infection or other complications.
Product Specifications
| Product Name | Code | Picture | Decription of component | Size | QTY |
| Fistula Set | On set |
|
Non-woven Gauze | 10cm*10cm-4ply | 5 |
| Medical drape | 40cm*50cm | 1 | |||
| Latex Gloves | M | 1 | |||
| Medical adhesive strip | 10cm *3 cm | 4 | |||
| Medical adhesive strip | 15cm *2 cm | 2 | |||
| Needle | 16G | 1 | |||
| Syringe-Luer lock | 10ml | 1 | |||
| Disposable medical mask | 17.5*9.5cm | 2 | |||
| Off set | Non-woven Gauze | 10cm*10cm-4ply | 5 | ||
| Latex Gloves | M-No Powder | 1 | |||
| Medical adhesive strip | 10 cm*5 cm | 2 | |||
| Needle | 16G | 1 | |||
| Syringe-Luer lock | 10ml | 1 | |||
| Disposable medical mask | 17.5*9.5cm | 2 |
Precautions
Hand hygiene
Before starting the operation, medical staff or patients should wash their hands thoroughly or use alcohol disinfectant. Use the sterile gloves in the set to avoid direct contact with the catheter, needle or insertion site with unsterile hands.
01
Maintain a sterile environment
When opening the dialysis dressing package, make sure the contents of the package are always sterile. Avoid contact between gauze, dressings, needles, etc. and non-sterile surfaces during use. During the entire process of cleaning and changing dressings, avoid direct contact with the insertion site or catheter with your hands.
02
Clean the insertion site
Use the alcohol cotton pad or iodine cotton swab in the dialysis dressing package to carefully clean the insertion site and surrounding skin. When cleaning, use appropriate techniques, usually circling from the insertion site outward, which can prevent dirt from being pushed back into the wound.
03
Frequency of dressing changes
The insertion site of hemodialysis needs to be changed after each treatment. The catheter insertion site of peritoneal dialysis should be changed regularly (usually daily or as recommended by the doctor), especially when the dressing is wet, dirty or loose.
04
Check for signs of infection
Every time you change the dressing, check the insertion site for signs of infection, such as redness, swelling, pus, pain, or abnormal secretions. If you find any abnormalities, you should contact your medical staff immediately. Dialysis patients have weak resistance, and infection control is very important.
05
Properly fix the dressing
Dialysis dressings should cover the insertion site firmly to ensure that they do not loosen or fall off. Using transparent waterproof dressings allows patients to keep the insertion site dry while bathing under the dressing.
06
Avoid excessive pressure
Dressings should not be too tight to avoid compressing blood vessels or catheters, affecting blood flow or causing discomfort. At the same time, the dressing should be tight enough to prevent bacteria or other contaminants from entering.
07
Waste disposal
Old dressings, used gauze, alcohol pads, etc. after replacement should be properly discarded in accordance with medical waste disposal requirements to prevent secondary contamination.
08
Hot Tags: dialysis dressing, China dialysis dressing manufacturers, suppliers, factory, Haemodialysis Catheter, Internal Jugular Tunneled Dialysis Catheter, Hemodialysis Powder, Hemodialysis Femoral Catheter, FX 60 Dialyzer, Fraxiparine Injection
